loading

Fox Mold-Professional Injection Molding Manufacturer Provide Customize Service Since 2013.

PA6+Brass insert+LSR over molding part l Fox Mold 1
PA6+Brass insert+LSR over molding part l Fox Mold 1

PA6+Brass insert+LSR over molding part l Fox Mold

Refrigerator defroster connector made by PA6 + Brass insert + LSR over molding.

    oops...!

    no product data.

    Go to homepage

    Refrigerator Defroster Connector

    LSR + Brass insert over molding

    The refrigerator defroster on the market can be roughly divided into two categories: physical defroster and chemical defroster.

    Physical defrosters usually use heating methods such as electric wires or infrared rays to melt the frost layer by raising its temperature. The chemical defroster uses some chemicals to react with the frost layer, so as to achieve the purpose of defrosting.

    Defrosting procedures usually last from a few minutes to a few hours, depending on the condition of the refrigerator and the sensitivity of the defrosting sensor and timer, so connector in the timer is very important.

    Refrigerator defroster timer (2)

    WHY CHOOSE LSR in this connector?

    LSR Characteristics 

    LSR is a product favored by consumers and manufacturers, has good elasticity and waterproof and moisture-proof, acid, alkali and other chemical corrosion resistance, so it is generally used to replace living plastic products.

    Low temperature resistance. General purpose silicone rubber can work above -40°C, while some special silicone rubber remains flexible and usable above -90°C.
    Low temperature resistance. General purpose silicone rubber can work above -40°C, while some special silicone rubber remains flexible and usable above -90°C.
    Non-toxic and environmentally friendly. It can be used for medical purposes.
    Non-toxic and environmentally friendly. It can be used for medical purposes.
    Electrical insulation. Can be used to make wires and other products.
    Electrical insulation. Can be used to make wires and other products.
    PA6+Brass Insert+LSR over molding production (2)

    Mold Specifications

    Our specialists can help you find the perfect solution for your 3 layer over molding mold.

    Part Name Connecor
    Material PA6 + Brass + LSR
    Prouction Way Insert Molding + Over Molding
    Part Size 50*50*25mm
    Part Weight 20g
    Color Black, Translucence
    Mold Cavity No 8 Cavities
    Mold lead time 5 weeks
    Exported or not No

    FAQ

    Tell us about your project requirements and we will figure out a solution that will meet your budget and design expectations.

    1
    How many molds produced for this part?
    3 Molds.
    2
    How long is the lead time?
    5 weeks
    3
    Min. order:
    - No MOQ for standard or stocking production. - Client needs to pay set up cost for 3 molds, LSR mold set up cost is about 500USD
    4
    What if I don't like the color?
    You can choose the color for RAL or Pantone system, we will mix by master batch, but there is color difference between each batch for low volume production.
    5
    What can kind of packing of your product?
    - Neutral Packing, export standard carton.
    6
    Is the brass insert provided by Fox Mold?
    Yes, send us the brass insert 2D and 3D, we will produce this kind of metal insert too.
    GET IN TOUCH WITH Us
    just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
    Related Products
    no data
    Copyright © 2025 -Fox Mold | Sitemap
    Contact us
    phone
    whatsapp
    contact customer service
    Contact us
    phone
    whatsapp
    cancel
    Customer service
    detect