Project Department Responsibilities on mold maintenance
1. During the transportation of the mold , the test mold group must be strictly protected from rain;
2. When transporting the molds, the test mold group must use a special forklift for pulling the molds ( to prevent the molds from colliding or falling to the ground during transportation );
3. When cleaning the mold oil during the trial mold, it is strictly forbidden to eject the ejector pin and use the cleaning agent to directly flush the oil.
4. During the mold trial, the parting surface of the mold needs to be wiped clean with broken white strips;
5. If the mold is abnormal during the mold trial or proofing, notify the mold related personnel in time to confirm and deal with it on site. Do not force the mold trial or proofing to continue with the defect.
6. After each mold is tested, the mold cavity needs to be treated with rust prevention before it is sent to the mold warehouse or tooling department.